TD type bucket elevator use belt as dragging device, which is mainly used for conveying material with bulk densityρ<1.5t/m³ in vertical direction, such as powdery material, particles, small lump, less abrasive material. Using normal belt, the temperature of conveying material should not exceed 60℃. Using wire belt, conveying material temperature can reach 80℃. Using heat resistant belt, material temperature not exceed 150℃, elevating height is 4~30m.
1. Widely usage, it can elevate powdery material, particles, small lump material.
2. Flexible to select mixing or centrifugal discharge method according to material properties.
3. Good sealing, no dust escape. Clean and environmental protection.
4. Using rubber belt with small dead load, flexible, stable operation, thus elevating speed and process efficiency is higher.
Model | Type | Capacity (m³/h) | Hopper | Drive Revolving Speed | Max Size | Elevating Height | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Volume | Bucket Pitch | Bucket Width | Speed | ||||||||
Deep Bucket | Shallow Bucket | Deep Bucket | Shallow Bucket | (mm) | (mm) | (r/min) | (r/min) | (mm) | (m) | ||
D160 | Belt Type | 8 | 3.1 | 1.1 | 0.65 | 300 | 160 | 1 | 47.5 | 25 | 4.82~30.02 |
D250 | Belt Type | 21.6 | 11.8 | 3.2 | 2.6 | 400 | 250 | 1.25 | 47.5 | 35 | 4.48~30.08 |
D350 | Belt Type | 42 | 25 | 7.8 | 7 | 500 | 350 | 1.25 | 37.5 | 45 | 4.3~30.3 |
D450 | Belt Type | 69.6 | 48 | 15 | 14.5 | 640 | 450 | 1.25 | 37.5 | 55 | 4.54-34 |