Flotation Machine is mainly used for separating copper, zinc, lead, nickel, gold and other non-ferrous metals, and it can also be used for ferrous metals and non-metallic rough and refined. Our company mainly supply BF Series Flotation Machine, XCF/KYF Series Flotation Machine, Aerated Flotation Machine etc.
XCF/KYF Series Flotation Machine
It not only has mechanical agitating device but also can use the outside special blower to blow air into the machine forcibly. However, the mechanical agitation generally just takes effect in agitating ore pulp and distributing air. Air enters into the machine mainly by outside blower's pressure. The aeration and agitation of ore pulp are separated. Therefore. compared with general mechanical agitation flotation machine. it has the features as follows: Aeration quantity can be adjusted according to requirement, easily adjusted and keep stable, which is consequently benefit for improving processing capacity and beneficiation index: Impeller doesn't take effect in air suction, so rotating speed is low. power consumption is less, abrasion is little, mud phenomenon of brittle mineral will not be happened easily: Power consumption is lower because of large processiing capacity, shadow trough. etc.The defect is that a set of compressed air system needs to be added. When intermediate product returning back, it needs to be lifted to convey by sand pump. This series of flotation machine has the models of KYF. BS-Kand so on.